Seven Protectalon syringes fanned out on a bright surface

Protectalon:
Sodium hyaluronate OVDs

OVD Cohesive and dispersive Biofermented
Protectalon 1.0% syringe
Protectalon 1.2% syringe
Protectalon 1.4% syringe
Protectalon 1.6% syringe
Protectalon 1.8% syringe
Protectalon 2.0% syringe
Protectalon 3.0% syringe
Protectalon DUO: 1.4% cohesive and 3.0% dispersive syringes
Indication & Usage

Cataract surgery: viscosurgical protection

Protectalon is a range of biofermented sodium hyaluronate ophthalmic viscosurgical devices (OVDs) from VSY Biotechnology for cataract surgery. It covers six cohesive concentrations from 1.0% to 2.0%, one dispersive at 3.0%, and Protectalon DUO, a single kit holding one 1.4% cohesive and one 3.0% dispersive syringe.

01
Cohesive: 1.0% to 2.0%

Creates and holds space for capsulorhexis and IOL implantation, then leaves the eye as a single bolus.

02
Dispersive: 3.0%

Coats and protects the corneal endothelium during phacoemulsification.

03
Every syringe

1.1 ml, sterilized twice, stored at 2 to 25 °C. No refrigeration required.

Presentations

Choose by viscosity

Surgeons select an OVD by how it behaves at rest. Zero shear viscosity is the measure: the higher the value, the more firmly the OVD holds space in the anterior chamber.

Protectalon 2.0% packaging
Extreme high viscosity
Protectalon 2.0%

Deep anterior chamber maintenance in demanding cases

Zero shear viscosity900,000 mPa·s
Concentration20 mg/ml
TypeCohesive, 27G cannula
Protectalon 1.8% packaging
High viscosity
Protectalon 1.8%

Deep chamber maintenance with easy aspiration

Zero shear viscosity600,000 mPa·s
Concentration18 mg/ml
TypeCohesive, 27G cannula
Protectalon 1.6% packaging
High viscosity
Protectalon 1.6%

Deep chamber maintenance with easy aspiration

Zero shear viscosity400,000 mPa·s
Concentration16 mg/ml
TypeCohesive, 27G cannula
Protectalon 1.4% packaging
Medium viscosity
Protectalon 1.4%

Chamber maintenance, shock absorption, easy manipulation and aspiration

Zero shear viscosity200,000 mPa·s
Concentration14 mg/ml
TypeCohesive, 27G cannula
Protectalon 1.2% packaging
Low viscosity
Protectalon 1.2%

Easy manipulation

Zero shear viscosity130,000 mPa·s
Concentration12 mg/ml
TypeCohesive, 27G cannula
Protectalon 1.0% packaging
Low viscosity
Protectalon 1.0%

Easy manipulation

Zero shear viscosity60,000 mPa·s
Concentration10 mg/ml
TypeCohesive, 27G cannula
Protectalon 3.0% packaging
Dispersive
Protectalon 3.0%

Coats and protects the corneal endothelium

Zero shear viscosity30,000 mPa·s
Concentration30 mg/ml
TypeDispersive, 25G cannula
Protectalon DUO packaging: one 1.4% cohesive and one 3.0% dispersive syringe
Dual pack
Protectalon DUO

Cohesive and dispersive in one kit: one box for the whole procedure.

Zero shear viscosity200,000 and 30,000 mPa·s
Contents1.4% cohesive + 3.0% dispersive
Cannulas27G and 25G
Product Specifications

Technical specifications

Values common to every Protectalon. Concentration, viscosity and cannula per product are given above.

HA Type
Sodium hyaluronate, biofermented, no animal-derived raw material
Molecular Weight
Cohesive approx. 3.0 million Da · Dispersive approx. 750,000 Da
Volume per Syringe
1.1 ml
Osmolality and pH
300 to 350 mOsm/kg · pH 6.8 to 7.6
Storage
2 °C to 25 °C, no refrigeration required
Sterility
Double sterilization: steam and ethylene oxide. Latex free.
Presentation
Pre-filled syringe with cannula: 27G cohesive, 25G dispersive
Optical clarity
High optical clarity. Non-immunogenic, non-pyrogenic.
Mechanism of Action

How cohesive and dispersive OVDs behave

Every Protectalon is pseudoplastic: viscosity falls steeply under the shear of injection and recovers at rest. Chain length decides how the OVD behaves in the eye.

01
Cohesive: long chainsLong-chain hyaluronate of approx. 3.0 million Da entangles, so the OVD moves as one mass: reliable chamber maintenance and easy aspiration.
02
Dispersive: short chainsShort-chain hyaluronate of approx. 750,000 Da stays separate, spreads and coats tissue, and stays in place at high flow rates.
03
Easy to injectA high pseudoplasticity index lets the OVD pass a 27G cannula and recover its viscosity in the chamber.
HA Biomaterial Science
1001,00010,000100,0001,000,0000.0010.010.1110100Shear rate (s⁻¹)Viscosity (mPa·s)2.0%1.8%1.6%1.4%1.2%1.0%3.0%
In the Procedure

Protectalon at each step of cataract surgery

Protectalon is also the OVD specified for loading the AcriJET FLY 2.2 injector.

01 Capsulorhexis: cohesive 1.0% to 2.0%, or DUO

Space creation and maintenance, visibility, room for instruments.

02 Phacoemulsification: dispersive 3.0%

Protection of the endothelium and intraocular structures.

03 IOL implantation: cohesive 1.0% to 2.0%

Space creation and maintenance, smooth lens insertion.

04 OVD removal: cohesive 1.0% to 2.0%

Complete, easy removal to avoid a postoperative IOP rise.

FAQ

Frequently asked questions

For healthcare professionals only. Read the instructions for use before use. Product availability varies by country.

What is Protectalon?

Protectalon is a range of sodium hyaluronate ophthalmic viscosurgical devices made by VSY Biotechnology for cataract surgery. It includes six cohesive concentrations, one dispersive concentration and a dual pack.

What is the difference between cohesive and dispersive Protectalon?

Cohesive Protectalon (1.0% to 2.0%) has a molecular weight of approximately 3.0 million Da; it holds space and is removed easily. Dispersive Protectalon 3.0% has a molecular weight of approximately 750,000 Da; it coats the corneal endothelium and stays in place during phacoemulsification.

What does Protectalon DUO contain?

One 1.1 ml syringe of Protectalon 1.4% cohesive and one 1.1 ml syringe of Protectalon 3.0% dispersive, in a single box.

Is Protectalon of animal origin?

No. The sodium hyaluronate in every Protectalon is produced by biofermentation.

Does Protectalon need refrigeration?

No. Protectalon is stored at 2 to 25 °C.

Which Protectalon has the highest viscosity?

Protectalon 2.0%, with a zero shear viscosity of 900,000 mPa·s.

Used in the same procedure

Complementary products

Protectalon is specified for loading AcriJET FLY 2.2 and serves every IOL implantation.